How to Clean the Throttle of Chevrolet's New Sail

1. Remove the induction plug of the intake pipe (the one with electric wire on the left is circlip type) and the exhaust plug of the crankcase (it is a plastic bayonet and can be taken out by hand).

2. Pull out the two clips of the air cleaner and gently pull them down. By the way, take out the air filter first, remove some dust or clean it.

3, with a word screw, unscrew the clamp, gently use a little force, take out the intake pipe, and you will see the throttle.

Be sure to warm up the car, step on the gas pedal and idle for about 2800 rpm. It takes two people to do it, one to step on the gas pedal and one to spray the door cleaner. If you are not sure, don't put your hand into the throttle valve or throttle valve, because if you are not sure, it will turn off and get stuck in it. Remember, if you are not sure, spray it outside, not inside.

After cleaning, put it back. 3,000 revolutions outside, (not idle, 3-5 gears, depending on the road conditions) also let it catch its breath. Run and get rid of the dirty things inside.