How to clean the throttle of Honda Lingpai?

The method of cleaning the accelerator of Honda Lingpai: Step 1: Prepare tools. 10 small wrench (remove the battery terminal), large Phillips screwdriver (remove the air inlet elbow), internal wrench T30 (remove the throttle), and a bottle of carburetor cleaner. Step 2: Remove the throttle inlet elbow. Step 3: Unplug the throttle harness plug. Step 4: Remove the throttle body. Automobile throttle function: control the air intake, and the throttle position sensor can automatically control the oil quantity. In other words, it is the device that controls the throttle.

Honda Lingpai throttle maintenance: If the throttle is not cleaned for a long time, the throttle opening will be wrong and air with impurities will enter the combustion chamber of the engine. Both of these results will lead to abnormal engine operation, mainly manifested in unstable idle speed, sudden flameout during driving, decreased power, even difficult starting and increased fuel consumption. Effectively remove the carbon deposit and colloid attached to the combustion chamber, throttle valve and intake manifold, and make the air-fuel ratio return to normal. Improve combustion, reduce fuel consumption, increase effective engine power and stabilize idle speed. Harmless to sensors and three-way catalysis, and non-corrosive to metal and rubber products. An effective protective film is produced on the inner wall of the air intake system to ensure the normal operation of all components and reduce fuel consumption.

Cleaning nozzle: 1. Add Sinopec oil several times from time to time, which already contains a trace of cleaning agent. 2. Add ethanol gasoline from time to time, and the surfactant inside can well dissolve the gel of the nozzle. 3. The repair shop is in a bottle, and the cleaning agent enters the manifold through the throttle valve to dissolve the outer glue of the fuel injector. 4. The repair shop removes the nozzle for cleaning (generally not done).