How to adjust the throttle cable

Today, the car editor brought friends how to adjust the throttle cable. I believe that friends are basically paying attention to this issue. The throttle control mechanism is a device for the driver to adjust the engine speed through the accelerator pedal. It is used frequently. Due to the characteristics of cable structure and layout, it is easy to cause faults, engine speed control failure, and even safety accidents. Next, let's patiently introduce Bian Xiao to our friends on the bus!

How to Adjust the Throttle Cable: Adjustment Method

style = " text-align:center；" & gt

Adjusting the throttle position, I think, is to adjust the tension of the throttle cable. The end of the throttle cable is tied to the throttle. From the throttle to the throttle cable seat, it is found that the cable is not completely tightened, and the wire rope has the necessary deflection, which is about 5-8mm for a general car. If you want to reduce the throttle position, that is, reduce the deflection, the adjusting mechanism is on the fixing frame of the throttle cable. The specific adjustment method has been patiently decomposed in the above picture, and there is one thing to pay attention to here. Unless your driving style is more radical, you don't need to adjust the deflection below 3 mm, which will inadvertently consume more fuel. The throttle line may look rather dirty, but don't try to clean it. This is the grease on the accelerator cable.

Try not to adjust too much at a time, and then check the deflection of the steel wire after adjustment. It is best to adjust it within a suitable range, because too tight adjustment may increase the idle speed. The throttle line of some cars is not fixed on the bracket with a buckle, but with a nut. When adjusting, lift the fixing nut with a small wrench, and then rotate the position of the adjusting nut to adjust the tightness of the throttle pipe. Besides, if your car has an electronic throttle, you can't adjust it yourself. Because the adjusted accelerator pedal stroke and accelerator opening do not correspond to the pre-stored records in the engine computer, and the adjustment position is near the accelerator pedal, it is necessary to go to the repair shop to match the accelerator with special instruments.

How to Adjust the Throttle Cable: Adjustment Function

If the throttle is pulled too tightly, there will be no free travel. When exercising, the throttle opening will increase, the computer signal voltage will be slightly higher, and the fuel injection volume will increase, which will lead to the high idle speed of the engine, which will definitely waste engine oil.

The above is the problem and solution of how to adjust the throttle cable briefly introduced by the car editor to friends. I hope the brief introduction of the car editor can solve the problem for my friends. Well, today, the car editor will give a brief introduction here. If you want more information, please pay attention to this website.

Million car purchase subsidy