Solution of throttle position of boundary detector

Chevrolet explorer water tank water injection illustration: the explorer put water in front of the engine and behind the bumper, and added water to the kettle. Just open a lid and you can fill it up. Automobile water tank, also called radiator, is the main component of automobile cooling system. The function is to dissipate heat. The cooling water absorbs heat in the water jacket, flows to the radiator to dissipate heat, and then circulates in the water jacket to realize temperature regulation. It is an integral part of an automobile engine. Water tank is an important part of water-cooled engine. As an important part of the cooling circuit of water-cooled engine, it can absorb the heat of the cylinder block and prevent the engine from overheating. Because of the large specific heat capacity of water, the temperature of the engine did not rise much after absorbing the heat of the cylinder block. Therefore, the heat of the engine is conducted through the liquid loop of cooling water, with water as the heat carrier, and then the heat is dissipated by convection through a large area of fins to maintain the appropriate working temperature of the engine. Automobile water tank is mainly composed of radiator core, water pipe, cooling blades, upper water tank and lower water tank. The upper water tank is on the radiator, and the upper water tank is connected with the water tank below the radiator through a water pipe. When hot water flows down to the lower water tank, it becomes warm water, which cools the air blades and forms a duct. A large amount of cold air passes through the air holes, absorbs the heat of cooling water flowing through the water pipes, and then scatters into the air holes.