Subaru Outback Instrument Panel Indicator Solution

Subaru Outback instrument panel fault light is shown below.

When the ignition switch is initially turned to the "on" position, several warning lights and indicator lights will light up. It is used to check the working condition of the light bulb. Then press the parking brake and turn the ignition switch to the "on" position. For system check, the following lights will light up and go out after a few seconds or after the engine starts. If one light doesn't work, it means that the light bulb is burnt out or the corresponding system is out of order.

Some fault lights need to be repaired, but some fault lights need to be vigilant, which will not only damage some functions of the car, but also bring danger if it continues to drive.

1. Tire pressure monitoring indicator light

The tire pressure monitoring indicator light is always on, so it is necessary to check the tire pressure to avoid traffic accidents.

2. Anti-lock braking system warning light

Always on means that when ABS can't work normally, it can work normally, but it doesn't need ABS assistance.

3. Brake disc warning light

When the brake disc warning light is on, it is likely that the brake disc is faulty and needs to be replaced in time.

4. Battery warning light

The battery warning light is always on, indicating that the voltage generated by the motor is lower than the voltage generated by the battery, the generator is not working or the power cord is faulty, and it is necessary to go to the 4S shop for repair in time.

5. Airbag warning light

This light is on, which means there is something wrong with the airbag. It is likely that the airbag has expired, or there is something wrong with the electronic circuit.

6. Oil warning light

The oil warning light is on, which may be that the engine is short of oil and needs to be replenished in time.

7. Water temperature warning light

If the coolant temperature is too high or too low, the lamp will light up. If the cooling water is insufficient, it can be restored to normal by adding cooling water.

8. Engine fault warning light

The engine fault warning light is on, so it is necessary to use a diagnostic instrument to detect specific fault codes.

9. Brake warning light

When the brake warning light is on, it means that the brake fluid in the car is insufficient or the friction plate is excessively worn and needs to be repaired in time.

Million car purchase subsidy