How long does it take to clean the throttle?

After cleaning, the throttle should be initialized after installation. It needs to be initialized after cleaning the throttle, because the computer has a memory function when adjusting the throttle opening. Because there was sludge blockage before, in order to ensure the air intake, the computer will automatically adjust the throttle opening to keep the air intake in a normal state.

It takes a while to get used to it, depending on your driving habits. It is recommended to drive gently and at a constant speed. The driving computer needs a learning process to adapt to the operating environment of the automobile engine after carbon deposition is removed. This adaptation process is about 1000 km.

Generally, after clearing the throttle, the computer needs to be reset. If you don't do it, it is likely to cause a big increase in fuel consumption. Generally speaking, the simplest reset method is to disconnect the battery cord for more than 30 seconds. It is recommended to disconnect 1 min before connecting.

However, some models cannot be reset in this way and must be connected to the maintenance computer through the OBD interface on the vehicle. In this case, you can only go to the 4S shop or repair shop to reset the throttle with the repair computer.