How to add modern Elantra glass water? Filling position and capacity of Elantra glass water

The 2022 Elantra glass water storage tank is located on the left side of the engine room, and the filler is sprayed, as shown in the figure. Elantra glass has a water capacity of 4L, which can be added regularly according to the usage. Glass water is a consumable, so it is not necessary to change it regularly. The filling frequency depends on the frequency used by the owner.

1 water bottle

2 storage battery

3 Throttle

4 oxygen sensor

5 Brake tank

6 fuse box

7 Air cleaner element

8 Coolant tank

Elantra Glass Water Addition Course

1. Use the wiper operating knob to spray glass water.

2. When the wiper nozzle stops spraying water, open the cover of the glass water filler and add a small amount of glass water solution.

3. Turn on the wiper switch again to clean the old glass solution.

4. When there is no glass water sprayed from the second nozzle, add about 4L of glass water solution, and then cover it.

Homemade glass water course

1. Preparation materials: medical alcohol, detergent, clean water, plastic bottles with a capacity of more than 2L.

2. Connect 2L of purified water with a bottle.

3. Immediately add 500ml of medical alcohol.

4. Then put two bottles of detergent into the solution. (Inadequate dissolution of washing powder is easy to block the spray hole, so it is not suitable for use. )

5. Finally, shake well before use.

The configuration of glass water varies from season to season.

1. There is a lot of dust in the air in summer, so the amount of detergent should be increased appropriately, but not too much. It is difficult to clean a foamy detergent.

2. When the winter climate is cold, adding more alcohol can reduce the freezing point of the preparation solution. 40-50% alcohol and 50-60% water can ensure that the solution will not freeze above -25℃, which can meet the climate needs of most areas.