Dodge Coolway, do you need to remove the bumper to change the water tank?

Dodge Coolway replaces the water tank without removing the bumper. Remove the wire harness clip in the upper cross beam of the water tank and remove the wire harness; Remove the air cleaner assembly and the control computer; Remove the right headlight; Remove the fan frame assembly; Unscrew the drain bolt at the lower part of the water tank and collect the coolant; Remove the upper and lower water pipes; Remove the fixing bolts of the water tank; Take out the water tank at a certain angle and put it back according to the reverse steps.

Introduction of water tank

When the cover is opened, the buckle on the outer bumper of the water tank frame is removed. Just break the water tank, take it out and fix it with two T30 screws. The cooling system of automobile water tank can radiate the redundant and useless heat of the engine, so that the engine can work normally at various speeds or driving conditions.

Once the engine cooling water in the water tank boils and expands at high temperature and the pressure exceeds the set value, the water tank cover overflows to release the pressure, reducing the cooling water volume and preventing the cooling system pipeline from bursting. The failure of engine cooling fan will also lead to the increase of engine cooling water temperature or the leakage of cooling system pipeline, resulting in the decrease of cooling water. Please pay attention to whether the cooling water reduction amount and cycle are normal before adding distilled water.