Does Audi a6 burn engine oil? Audi a6 got off to a strong start.

1, the processing technology of Audi engine cylinder, the cylinder wall of the engine is reticulate under the microscope, and every tiny mesh is a "small oil depot" for storing engine oil. When the piston runs up and down in the cylinder, the lubrication performance is better than that of the plane cylinder wall, and the wear between the piston ring and the cylinder wall is minimized.

2. Audi's piston ring has good toughness, and its tension is weaker than that of Japanese cars. Simply put, it is strong, but it is not elastic. This matching naturally reduces the wear of the piston ring on the cylinder wall when it moves up and down. Therefore, after driving for hundreds of thousands of kilometers, the wear of the cylinder wall of the engine is much smaller than that of other cars, and the engine can still maintain a good working condition.

The engine is like the heart of a car. In the final analysis, is the oil burnt out or the piston ring out of order? Under normal circumstances, there will be an oil loss of 0.2L when it is not 1000km. If it exceeds too much, oil burning may occur. If there is a problem with the piston ring seal, the oil will sneak into the combustion chamber to participate in the combustion with the movement of the piston, and then oil burning will occur.

In order to prolong the service life of the engine, Audi car manufacturers burn engine oil.

Precautionary measures for fuel:

1. Use high-quality engine oil:

The oil is easy to corrode and age at high temperature for a long time, which leads to the thinning of oil film and easy to escape to the combustion chamber to participate in combustion. Therefore, using high-quality engine oil can greatly delay this phenomenon.

2. Pay attention to the cleanliness of the fuel circuit:

Carbon deposition is inevitable in the combustion process of fuel, which is the root cause of some automobile faults, such as aging of valve oil seal and widening gap between piston and cylinder wall. These are directly or indirectly related to the formation of carbon deposits, so keeping the oil circuit clean is of great help to prevent engine oil from burning. Of course, this requires the help of high-quality fuel additives.

3, with the help of external force:

The cleanliness of fuel oil circuit and the anti-aging degree of engine oil basically determine whether the engine oil can prevent burning. Therefore, considering the relationship between domestic oil products, it needs the help of high-quality engine oil and (PNF) fuel additives, which is also the key to solve the problem that the engine oil cannot be disassembled or repaired.