The difference between upturned pneumatic strut and downturned pneumatic strut.

The difference between the upward-tilting door and the downward-tilting door of the gas column lies in the different directions of the two kinds of gas columns. The first paragraph is reversed. The second paragraph was rejected.

Use a hand drill for installation. Steam props are generally used in flip doors, and the most difficult thing to install steam props is to determine the installation position.

First pull the steam prop to the maximum distance, then fix one end of the steam prop on the door panel and put the door panel on the cabinet. If the steam strut is 45n, open the door horizontally and fix the other end. Air strut is the key component to ensure the normal opening and closing of cupboard doors, so the quality of air strut is very important.

When the hydraulic rod on the bed can't be pressed down, the solution:

1, whether the installation location is correct, it is best to have a special master to install it: if not, find the manufacturer.

2. See if there is any stuck place, and see if there is deformation or sundries on the edge of the bed.

3. Try to lift it, then see if it is ok, see if it is stuck or other reasons, or read the instructions again.