Do you need computer matching after cleaning the throttle?

After the throttle is cleaned, it is necessary to use the common driving computer to re-pair. Because the throttle is squeezed by carbon deposit, the opening of the throttle will expand accordingly. After cleaning, if there is no calibration, the throttle opening will remain in the state before carbon deposition, and the air intake and supply will increase, resulting in idling jitter, large speed ratio and increased fuel consumption of automobile engines.

However, for the suspended throttle of mechanical equipment, the negative level of the battery can be cut off after cleaning the throttle. After 15 minutes, the driving computer will automatically reset the data information, and then adjust the throttle opening according to the new driving habits, but it will be calibrated independently after running 10 km.

Throttle cleaning process

① Find the throttle valve, which is behind the air inlet and connected with the air filter element;

② Remove the air cleaner box first, and then remove the plastic hose connecting the throttle valve and the air cleaner;

③ Then pull out the accelerator cable and sensor, unscrew the anchor bolt for fixing the accelerator and remove it;

(4) Later, apply a special accelerator cleaner and spray it on the oily carbon deposit, wait for the organic solvent to dissolve the carbon deposit, and wipe it clean after 1-2 minutes.

Throttle cleaning tutorial video

Million car purchase subsidy