How to repair the 1 cylinder row where Geely King Kong system is too dense and idle?

According to the inquiry, a driver in Baidu showed that the Geely King Kong system was too thick, and the idle stop cylinder bank 1. The repair method is as follows:

1. Check the air filter: the air filter is too dirty and the filter screen is blocked, which may lead to too much mixed gas. So first remove the air filter and check whether it is too dirty. If it is too dirty, clean the filter with compressed air or replace it with a new air filter.

2. Check the throttle: If the throttle is not fully opened, the mixture may be too rich. Therefore, it is necessary to check the throttle opening. If the throttle opening is not enough, clean the throttle and adjust its opening.

3. Check the main nozzle: improper cleaning of the main nozzle may cause nozzle loss, increase flow and lead to excessive mixed gas. Therefore, it is necessary to check the status of the main nozzle. If there is something wrong with the main nozzle, it can be replaced.

4. Check the float: oil leakage after the float is broken or improper closing of the triangular needle valve may lead to too high oil level in the float chamber, resulting in too rich mixed gas. Therefore, it is necessary to check the state of the float. If there is something wrong with the float, you can replace the float needle valve.

5. Check the vacuum or mechanical fuel-saving ball valve: Poor closing of the vacuum or mechanical fuel-saving ball valve may lead to oil leakage, increase the oil supply of the main pipeline, and thus lead to excessive mixed gas. Therefore, it is necessary to check the state of vacuum or mechanical fuel-saving ball valve. If there is a problem, you can replace the vacuum line and ball valve.