Why clean the air inlet and three-way catalyst? Necessity of cleaning air inlet and three-way catalyst.

1, because the air intake is often not cleaned, it will lead to weak acceleration of the vehicle, sometimes it is difficult to start, and in severe cases it is impossible to start the vehicle. If it goes on for a long time, it will also wear the throttle and spoiler, resulting in high or unstable idle speed. Finally, only a new throttle assembly can solve the problem! Cleaning the inlet also prolongs the service life of the throttle valve.

2. Cleaning the air inlet is also cleaning the air inlet and carbon deposit of the engine combustion chamber.

3, inlet cleaning, cleaning the gum and carbon deposits generated during combustion, protecting the injector and prolonging the service life! Improve engine power and reduce fuel consumption!

4. Because the gasoline used contains high sulfur and phosphorus, chemical complexes can be formed on the surface of oxygen sensor and three-way catalyst. Because the urban roads are crowded, the switching situation will make the fuel burn incompletely, and the products of incomplete combustion will adhere to the surface of the three-way catalyst. Because when cleaning the nozzle, throttle and air inlet, carbon and particulate matter will pollute the three-way catalyst. These factors will lead to poor exhaust, increased back pressure, vehicle waste oil, decreased power, and even block the three factors in serious cases, leading to vehicle spontaneous combustion. It will cause the three-way purification function to decrease or even fail, so that the vehicle cannot meet the exhaust emission standard, and the service life of three-way10-200 thousand kilometers will be shortened by 30 thousand to 50 thousand kilometers.