Will the gas leakage of Zotye T600 throttle affect fuel consumption?

The gas leakage of Zotye T600 throttle will affect fuel consumption. The air leakage in front of the throttle valve of Zotye t600 is due to excessive carbon deposition on the inner wall of the throttle valve, resulting in air leakage at the throttle valve. It is necessary to clean the throttle valve to eliminate this problem. After cleaning, wipe the inside of the throttle with a paper towel, and then put the air inlet of the air cleaner back in its original position, and the operation is completed.

Air leakage characteristics of automobile throttle

The air leakage of automobile throttle is mostly caused by the air leakage at the interface between throttle seat and intake seat. In severe cases, air leakage here will blacken the corresponding parts of the hood. This is because the intake pipe joint seat is made of plastic, and only four screws are fastened on the throttle seat, or the screws are loose or improperly fastened after the throttle valve is disassembled and cleaned, resulting in deformation and air leakage of the intake pipe joint seat.

Improving the start-up performance of a-type in-line pump with packing. After replacing the starting enrichment solenoid valve, it is difficult to start the engine because of improper pump adjustment or different pump hole sizes in the valve, and the working stroke of the starting shaft is not enough. In this case, the starting performance of the fuel injection pump can be improved by appropriately adding 2mm thick gaskets at the solenoid valve (starting enrichment) and the governor housing to increase the working stroke.