What is the matching method of Dongfeng Nissan Tiida throttle?

Trent (check base price | check parameters) throttle matching method: turn off the ignition switch and wait at least 10 second; Ensure that the accelerator pedal is completely released, turn the ignition switch to the on position and wait for 3 seconds; Quickly repeat the following operations for 5 times within 5 seconds; Wait for 7 seconds, fully press the accelerator pedal, and keep this state for about 20 seconds until the MIL stops flashing and starts to light up; Fully release the accelerator pedal within 3 seconds after the fault indicator light is turned on.

Start the engine and idle for a period of time; Idle for more than 20 seconds; Let the engine run at high speed for two or three times to ensure that the idle speed and ignition timing meet the requirements.

Throttle is a controllable valve that controls air to enter the engine. There are two kinds of throttle: traditional cable throttle and electronic throttle. After the gas enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, which will be burned to do work. It connects the air filter and the engine block, and is called the throat of the automobile engine. Whether the acceleration of a car is flexible is closely related to the cleanliness of the throttle. Whether the throttle should be removed for cleaning is also the focus of discussion among car owners.

The traditional engine throttle control mechanism works through a cable or a pull rod, one end of which is connected with the accelerator pedal and the other end is connected with the accelerator linkage plate. The electronic throttle mainly uses the throttle position sensor to control the opening angle of the throttle according to the energy required by the engine, so as to adjust the intake air.

Million car purchase subsidy