What if the throttle line doesn't rebound?

There are several reasons why the accelerator line of Pacific Auto Network does not return: 1. The accelerator pedal is stuck. First, check whether the foot pad is stuck on the accelerator pedal. 2. If the throttle is stuck, directly pull the main shaft of the throttle body to see if it will return to its original position. If not, fix it. 3. The inside of the throttle line itself is rusted and stuck. Remove the throttle pipe and check whether it can move smoothly. Change the card when it is issued. 4. If it is not normal after restarting, please send the car for repair. There are many sensors, which are difficult to find, and can only be replaced if there is a problem.

Note: If the throttle line is pulled too tightly, there will be no free stroke, which will increase the throttle opening, slightly higher computer signal voltage and increased fuel injection, resulting in excessive engine idle speed, so waste oil must be used.

Don't worry, once again, the first priority in any emergency is to brake. The higher the vehicle speed, the greater the braking force, and the normal driving computer will appropriately reduce the fuel supply. Then put N gear, stop the car and turn off the engine. The instructions of most models are marked with the words "Please don't use N gear when driving". Indeed, using N gear when driving will cause some damage to the machinery, but this method can be used in an emergency, after all, it doesn't last long.