How to install the throttle of MG gt ruixing 20 15?

1. According to the description data of MG GT Ruixing 20 15, install metal sealing ring and plastic parts at the throttle position on the intake branch pipe, and pay attention to the tight connection of the interface.

2. Unplug the fixing clips of the air filter and air pipe, and remove the air filter and air pipe from the intake manifold.

3. Unplug the electric plug on the throttle and remove the pull rod connecting the throttle and the car body.

4. Saw off all four holes at the throttle position with a hacksaw, and remove the fixing screws.

Unplug the air pipe slot, and then take out the air inlet pipe together with the electric plug.

5. Install the newly bought throttle and screw it down.

6. Install four clips, connect the electric plug and the air cleaner, and finally tighten the screws. It should be noted that the throttle valve needs to be installed together with the air filter, and the throttle valve is responsible for controlling the amount of air entering the engine to ensure more complete fuel combustion. At the same time, check the oil quality and high-pressure sparks.