What is the fault of Jianghuai Shuailing epc light?

Generally speaking, there are two possibilities for EPC lights to turn on. First of all, the throttle is dirty and needs cleaning. In another case, the brake light is not on, so it is necessary to check the brake switch and wiring. Because of the oil problem, the EPC fault light will also light up. Jianghuai Bell epc lighting processing mode: 1. Air intake system failure: If the air intake pipe leaks or is blocked, it will affect

What is the fault of Jianghuai Shuailing epc light?

Generally speaking, there are two possibilities for EPC lights to turn on. First of all, the throttle is dirty and needs cleaning. In another case, the brake light is not on, so it is necessary to check the brake switch and wiring. Because of the oil problem, the EPC fault light will also light up.

Jianghuai Bell epc lighting processing method:

1. air intake system failure: if the air intake pipe leaks or is blocked, it will affect the engine's insufficient air intake, and the sensor of the vehicle will sense it, thus affecting the lighting of the vehicle's epc light.

2. Throttle blockage: If the throttle of the vehicle is too dirty or has too much carbon deposit, the air intake of the vehicle will be unstable, which will also affect the lighting of the epc light of the vehicle.

3. The fuel used is not up to standard: the engine compression ratio of each car is different, and the fuel label required is also different. If the gasoline used is lower than the required label or the quality of the gasoline used is poor, it will also affect the lighting of the EPC lamp of the vehicle.

4. Abnormal cylinder pressure: In the cylinder of the vehicle engine, the working pressure is within the necessary range. If it is beyond the normal range, the epc light of the vehicle will light up.

5.ECU itself is out of order: If the ECU hardware of the vehicle is out of order, the EPC light in the vehicle will definitely be on.

How to zero the maintenance lamp of JAC Shuailing t6?

Jianghuai t6 can be reset to zero with the general special diagnostic tool TECH2, or it can be reset manually with the button on the right side of the instrument panel: turn off the ignition switch, hold down the two arrow buttons at the same time, and then turn on the ignition switch. After about 3s, release the two arrow buttons, and the maintenance menu asks whether it is zero. Press the set key for more than 3s, and press the MODE key to turn off the ignition switch to complete the reset.

In order to ensure the normal running of cars, manufacturers set some early warning indicators when producing cars. After a certain mileage, the main thing is to replace the accessories in time. However, sometimes the owner does not intend to do maintenance so early, or the maintenance light has not been eliminated after maintenance, so the car maintenance light has been reminding.

The function of maintenance lamp is to record the mileage of some important accessories, just like the timer in sprint competition, which plays a role in reminding car owners and car maintenance workers. If the owner replaces the relevant parts and fails to reset the maintenance light to zero, the corresponding automobile maintenance light will also reset to zero. If the owner replaces the relevant parts, but it does not return to zero, it will not affect the performance of the vehicle, but it will bring trouble to the next replacement of auto parts: it is impossible to accurately know the service time of the new parts. What is the fault of Jianghuai Shuailing epc light? How to reset the maintenance lamp of Jianghuai Shuailing t6 to zero @20 19?