What is the basic setting of electronic throttle?

Pacific Auto Network first turns the ignition switch to the on position. Do not start the engine. Connect the instrument to the engine system of this model, and read and clear the fault code. Then, select 04 basic adjustment function, enter the channel number 098, 060 or 00 1, and press Enter. When ADP, OK or adaptive normal are displayed on the instrument, it means that the basic settings have been completed. Exit the instrument and turn off the ignition switch.

When do you need to set the basic electronic throttle? When there are factors that affect the coordinated work of the electronic control unit and the throttle body, it is necessary to set up a basic electronic throttle.

If the following situations occur, then the electronic throttle is basically set to A; After replacing the new electronic control unit, because the characteristics of the throttle body are not stored in the new electronic control unit, it is necessary to make basic settings.

b； When the main power supply of the car is cut off, the memory in the memory of the electronic control unit will be lost and basic settings need to be made.

c； After replacing a new throttle body, basic settings need to be made.

d； After cleaning the throttle body, basic settings are required.

What will happen if the basic setting of electronic throttle is not carried out? After the above components are repaired or replaced, if the basic settings are not carried out, the work of the electronic control unit and the idle speed control components will be uncoordinated, which is characterized by inaccurate and unstable idle speed control, such as excessive or low idle speed and unstable idle speed.

Condition a required for basic setting of electronic throttle; There is nothing wrong with the electronic control unit.

b； The battery voltage should not be lower than 12V.

c； Throttle is in idle position.

d； Clean the throttle body.

e； There is no need to press the accelerator pedal or start the engine before the basic setting.

The basic setting method of the electronic throttle is to turn the ignition switch to the on position, do not start the engine, connect the instrument to the engine system of this model, read and clear the fault code, then select the 04 basic adjustment function, input the channel number 098,060, or 00 1, and press Enter. When ADP, OK or adaptation is normal on the instrument, the basic setting is completed. Exit the instrument and turn off the ignition switch.

The electronic throttle is basically set with the vehicle channel number 098; Used for middle and low-grade cars of Shanghai Volkswagen and FAW-Volkswagen, such as Santana 2000GSI and Jetta King.

060; Used in high-end new cars of Shanghai Volkswagen and FAW-Volkswagen, such as new Bora and Audi A6L.

00 1; Used in the old Audi 100, Jetta avant-garde car.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)