How does Xuanyi throttle match?

The DIY matching method after Xuanyi DIY cleaning the throttle valve is 1. Preheat the engine to normal operating temperature. 2. Turn the ignition switch (key) to the OFF position, turn off the fire, and wait at least 10 second. 3. Turn the ignition switch to the on position when not stepping on the accelerator. Wait for 3 seconds. 4. Quickly repeat the following operations of 5 and 6 for 5 times within 5 seconds (actually, fully depress and completely release the accelerator pedal for 5 times within 5 seconds). 5. Fully depress the accelerator pedal. 6. Loosen the accelerator pedal completely. 7. Wait for 7 seconds and keep this state for about 20 seconds until the MIL stops flashing, and then stay on for a long time. 8. After the 8.MIL lights up, completely release the accelerator pedal for 3 seconds. 9. Start the engine. I have done several tests and left it idle for a period of time, which is totally ok. The match is without a car. No matter how you step on the accelerator, you won't hurt the car. Haha, it's actually the collocation method of Tiida. The key is to grasp the time. Try a few more times and you will succeed.