What is the reason why Fukang engine stop indicator is on?

First, the vehicle engine exhaust system is faulty, which is one of the most important and common reasons why the vehicle engine fault light is on. If this kind of fault phenomenon occurs, it is mostly the cause of carbon deposition in the vehicle engine or the problem of fuel quality. It is suggested that the carbon deposits in the throttle and air intake should be cleaned first, and then the carbon deposits in the combustion chamber should be cleaned. If the quality of the added fuel is too poor, this suggestion is to add some high-grade gasoline or fuel treasure to alleviate it.

Secondly, because the sensor related to the vehicle engine system is damaged, the fault light comes on. Then this fault is mostly caused by oxygen sensors or solenoid valves used to adjust the intake and exhaust camshafts. Go to the repair shop or 4S shop and use the computer to decode it accordingly. According to the relevant fault code, which sensor is faulty? Replace the brand-new sensor, and then clear the fault code, and the problem can be solved ~

Thirdly, the linkage failure caused by gearbox system or brake system is usually accompanied by instrument panel, and there will be other fault reminders. For braking system, check ABS pump and wheel speed sensor. If it is a gearbox system, it needs to be decoded by a computer to see if it is caused by the failure of the relevant gear switch or the failure of the electromagnetic valve body inside the gearbox.