How to control the cylinder to stop at any position

The simplest method is a three-position solenoid valve or electromagnetic switch.

Requirements for use environment:

In places where there are many dust, water drops and oil drops, the rod side should be provided with a retractable protective sleeve. Where the telescopic protective sleeve cannot be used, a cylinder with a solid dustproof ring or a waterproof cylinder should be selected.

If the ambient temperature and medium temperature of the cylinder exceed-10~60℃ when using the magnetic switch, anti-freezing or heat-resistant measures should be taken.

Extended data:

Precautions for cylinder installation:

1. Before installing and using the cylinder, check whether the cylinder is damaged during transportation and whether the connecting parts are loose. ?

2. When the cylinder is placed horizontally, especially for the long-stroke cylinder, use the level to check the three-point position (piston rod fully extended, middle and fully returned).

3. No matter what installation method is adopted, the cylinder block shall not be deformed, and the installation base of the cylinder has sufficient rigidity. It is not allowed to connect the load with the piston rod by electric welding. ?

4. When installing, the piston rod of the cylinder should not bear eccentric load, but lateral load, and the load direction should be consistent with the axis of the piston rod. ?

Baidu encyclopedia-cylinder