Where is the pressure relief valve of MG 6?

The pressure reducing valve of MG 6 in Pacific Auto Network is on the intake pipe near the throttle. MG 6 is a compact car owned by MG. The length, width and height of this car are 4704 mm (mm), 1848 mm (mm) and 1466 mm (mm) respectively, and the wheelbase is 27 15 mm (mm).

The MG 6 water tank is located on the left side of the engine compartment, near the wiper. When adding water, ensure that the automobile cooling system is in a cold state, otherwise, when the cooling system is in a hot state, unscrew the water tank cover, and the escaping steam and hot coolant will cause serious damage. The filling of coolant should not exceed the "max" mark.

The design of the MG 6 center console is very simple, with a central control panel at the top and only six buttons on both sides, namely, the power button, the main interface button, the SRC button, the volume adjustment button and the mute button.

Water tank, also known as radiator, is the main part of automobile cooling system; The function is to dissipate heat. The cooling water absorbs heat in the water jacket, flows to the radiator and dissipates heat, and then returns to the water jacket for circulation, thus realizing temperature regulation.

It is worth mentioning that the cooling system should be checked every week to ensure that the water level in the water tank is not lower than "min". If the coolant level drops significantly in a short time, there may be a leak. Please contact the 4S shop for repair as soon as possible.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)