How to quickly replace Buick Sail generator belt

How to quickly replace the belt of the sail generator is as follows:

Tools: flashlight, screwdriver, crowbar, etc.

Second, the operation steps:

1. Turn off the engine and let it cool. Open the hood and find the generator belt in front of the engine.

2. Press the belt between pulleys to check its looseness. If the belt is pressed more than 1/2 inches, it means that the belt is loose, which will affect the performance of the generator and even damage the belt.

3. Check the oil or grease pollution of the generator belt, turn the belt over, and check whether there are cracks, lack of rubber blocks and slippage in the inner layer.

4. Loosen the adjusting bolt of the generator and adjust the pivot bolt.

5. Move the generator inward to loosen the belt.

6. Peel off the generator belt from the pulley, and then remove the generator belt.

7. Compare the removed old belt with the new belt, and install the new belt after confirmation.

8. Pull the generator outward until the belt is tensioned, and ensure that the generator belt is installed in the correct position.

9. Adjust the pivot bolt in strict accordance with the manufacturer's instructions.

10. Start the engine to verify the repair results, and check the belt tension again after turning off the engine.