Traditional Culture Encyclopedia - The 24 Solar Terms - How to remove the throttle of Chuanqi gs8?

How to remove the throttle of Chuanqi gs8?

1. Remove the air filter assembly; 2. Remove the throttle cable; 3. Loosen the three fastening bolts on the throttle body with an Allen wrench and remove the throttle; 4. Remove the sealing rubber ring at the joint of the throttle body and the air cleaner.

1. Remove the air filter assembly;

2. Remove the throttle cable. First, screw the throttle control mechanism to the maximum position, hold the throttle cable with the left hand and the right hand, and take it out from the gap of the control mechanism. Then remove the cable from the accelerator cable bracket, remove the limit clamp and gasket and put them in a safe place. Finally, remove the throttle cable bracket fixed on the throttle body;

3. Loosen the three fastening bolts on the throttle body with an Allen wrench and remove the throttle;

4. After removing the throttle body and/or sealing apron, check for signs of aging and cracks.

The throttle body is the valve that controls the intake speed of the engine. By changing the size of the throttle, the cross-sectional area of the intake passage can be changed, thus controlling the working state of the engine. The load of the engine is detected by the throttle position sensor, which is mainly composed of throttle, throttle shaft, throttle position sensor, idle speed control valve, torsion spring and water pipe. Some cars have air compensation valves.