What does Bora Legend 0.0set mean?

The setting button of Pacific Auto Network Volkswagen Bora refers to the tire pressure monitoring system, which can automatically monitor various tire conditions in real time by recording tire speed or electronic sensors installed in tires, which can provide effective safety guarantee for driving. The length, width and height of Bora are 4663mm, 18 15mm, 1462mm, the wheelbase is 2688mm, and the fuel tank volume is 50l.

The 0.0/set button is generally located near the vehicle instrument cluster or steering wheel, and its function is to reset the mileage once and adjust some functions. If you press this button for a long time, you can zero the single mileage.

If you press this button briefly, the different functions of the brand model will be slightly different, such as switching the menu content in the display screen of the instrument cluster and adjusting the time of the instrument cluster.

When the automobile instrument cluster displays, mileage can be divided into single mileage and total mileage.

The single mileage of a car can be used to record the number of kilometers that the user drives each time, which is generally four digits, and will automatically return to zero when it reaches 1000 kilometers. If the driving distance is less than1000km, you can reset the mileage once by pressing the reset button.

If the epc light is on, the common causes of vehicle jitter are: too much carbon deposit in the throttle valve, and the opening angle is problematic. Due to engine misfire and cylinder missing, the throttle valve is not working properly.

Air leaks behind the throttle valve, and the detection data of the intake pressure sensor is abnormal. These conditions will light the EPC lamp. If the above problems occur, you can stop the car, turn off the ignition switch and restart the engine. If the fault light goes out, it is an accidental fault. You can continue driving and drive the vehicle to the maintenance agency for maintenance as soon as possible.

If the fault indicator does not go out after restarting the engine, it proves that the fault still exists. You can drive in the same place or at a low speed. If the refueling door does not respond, it is recommended not to drive as much as possible. If the throttle and engine acceleration are normal, you can continue driving and drive the car to the maintenance agency for maintenance as soon as possible.