Mitsubishi Golan throttle manual matching method is as follows

Turn the key to the power gear first, and never start the car, that is, turn it off. After standing for about 10 second, quickly press the accelerator pedal to the bottom. Be sure to step on it quickly. Hold 15 second, and then quickly lift the pedal. Then close the key door, take out the key and let it stand for about 15 seconds. Start the car normally, and the matching is completed. Throttle matching mode: 1. If you have a 5053 data cable, you'd better have one. VCDS 10.6.3 software, enter the "Engine" module, enter "Match", enter "000" in the channel number, and then click OK (the purpose of this is to clear the memory data of the original ECU about the throttle); Return to "Basic Settings", enter "060" in the channel number, and click "OK" to display the data to complete the throttle matching; 2. Different from the first one, the step of entering "000" in the channel number is omitted, and "060" is directly entered in the channel number in "Basic Settings"; 3. The driving computer has automatic learning function, so don't worry too much about essential oil. Disconnect the negative power cord of the battery again, and the ECU is powered off. Then, connect the negative battery power cord, and there will be sparks. In general, the throttle can also be matched. Mitsubishi Goran needs special diagnostic equipment to cooperate with the electronic throttle body after cleaning, and the idle speed will be normal after the new initialization setting. It is recommended that vehicles go to special shops to match.