What are the steps to match the old Teana idle speed?

The steps of idle high allocation of Laotianlai are as follows: 1. Turn on the ignition switch after the flameout. 2. Press the accelerator quickly after about 3 seconds, and make sure to release the accelerator pedal 5 times within 5 seconds. 3. Then wait for about 7 seconds without moving anything, and then step on the accelerator. 4. After continuously pressing the accelerator pedal for about 10 seconds, the engine fault light on the clock will flash and then remain on. At this point, the throttle matching has been completed, just release the accelerator pedal. The steps to clean the throttle are as follows: 1. Remove the metal collar of the throttle hose, and the left end is the throttle; 2. Remove the negative electrode of the battery and turn off the ignition switch; 3. Straighten the throttle plate, spray a small amount of "carburetor cleaner" into the throttle, and then carefully scrub it with polyester rag or high-spin "non-woven fabric". If you can't reach it, you can wipe it with a rag.