Cruze intake pipe can't be pulled out. In what way?

Disengage the body retainer and open the buckle. Open the intake manifold, take out the air filter, then remove the whole intake pipe, remove the throttle valve, remove the mounting screws that fall into the intake manifold, and remove the manifold. The intake manifold is located between the throttle valve and the cylinder head, but before removing this intake manifold, the air passage connected with the throttle valve must be removed before removing the intake manifold.

Steps to remove the intake pipe assembly

Bolt tightening torque 10 plus 2N point m is generally installed in reverse order. Turn off the ignition switch and all electrical appliances, loosen the clamp arrow b, disconnect the crankcase ventilation pipe 1 and the air pipe assembly 2, loosen the clamp arrow a, and remove the air pipe assembly 2 and the upper intake manifold assembly.

Disassembly steps: Turn off the ignition switch and all electrical appliances, disconnect the negative battery, remove the manual maintenance switch, remove the electronic throttle body, remove the intake air temperature and pressure sensor, loosen the clamps arrow A and arrow C, unscrew the fixing bolt of the crankcase ventilation pipe bracket arrow B, and remove the crankcase ventilation pipe 1. The tightening torque of bolt arrow B is increased by 2N points m. ..