Installation method of pressure valve of wall-hung boiler

The pressure valve of the wall-hung boiler is an important part of the wall-hung boiler, which is used to adjust the water pressure in the wall-hung boiler and ensure the normal operation of the wall-hung boiler. The following is the installation method of the wall-hung boiler pressure valve:

1. installation location: the pressure valve of the wall-hung boiler should be installed above the exhaust pipe, not far from the wall-hung boiler, so that it can directly contact the water pipes in the boiler.

2. Installation method: When installing the wall-hung boiler pressure valve, it is necessary to connect the pressure valve with the water pipe on the wall-hung boiler with a joint or elbow to ensure that the joint is watertight.

3. Installation angle: The installation angle of the wall-hung boiler pressure valve is very important, generally vertical.

4. Exhaust pipe: When installing the wall-hung boiler pressure valve, pay attention to the position of the exhaust pipe to make it exhaust smoothly and avoid valve blockage.

5. Fixing method: When fixing the pressure valve of wall-hung boiler, attention should be paid to the use of appropriate pipe clamps or brackets to make it stable and reliable.

6. Inspection: After installation, it is necessary to inspect the pressure valve of the wall-hung boiler to see if it can work normally, so as to ensure the safe and normal operation of the wall-hung boiler.