Zero solution of Peugeot 307 maintenance lamp

When the ignition switch of Peugeot 307 is turned on, a wrench mark (maintenance indicator light) will appear on the left side of the kilometer, indicating that this beloved car must be maintained. After a few seconds, the mileage will return to normal. However, if the mileage of the beloved car is less than 1000 km or has exceeded it since the next maintenance, the wrench mark will always be on. Here is how to calibrate the maintenance lamp of Peugeot 307.

Zero adjustment mode of Peugeot 307 maintenance lamp;

1. First turn off the ignition switch of Peugeot 307.

2. Then press the zero button of the instrument.

3. Turn on the ignition switch, and the mileage display will gradually count down.

4. When the display shows "=0", it means that the maintenance light has been successfully zeroed.

5. Release the key and the wrench trace will disappear.

However, it should be noted that after the actual zeroing operation of Peugeot 307 maintenance lamp is successful, if it is necessary to disconnect the battery, it is necessary to lock the car and wait for more than 5 minutes, and then disconnect the battery after the actual zeroing operation takes effect.