What happened to the sudden failure of diesel refueling and flameout?

This starts with the engine of this model, which is equipped with a 2.0 naturally aspirated engine and a 2.3 engine, both of which are equipped on this model. First of all, this fault should be checked from these places:

1 indicates how much fuel is left in the fuel tank, or it may be that the fuel stock is too small to reach its adsorption pressure.

Then the fuel pipeline is blocked, resulting in low fuel pressure and weak refueling.

3. Check the quality of the accelerator pedal sensor. If this sensor fails, you will find that there is only one speed and the throttle does not respond.

4. Check the throttle quality. Throttle is a control system composed of integrated circuit board, and its failure will also cause no response to acceleration.

5. Check the dirt on the throttle. Dirty throttle valve is caused by carbon deposition. If he accumulates too much carbon, it will cause jamming, acceleration and no response.

Check the ECU of the engine to see if his problem caused the acceleration to be unresponsive.

Check the signal transmission of the gearbox to see if his problem caused the acceleration to be unresponsive.

Check the control circuit of the engine. The main problem of this control circuit is that poor contact leads to no response to refueling.