Simple method for make handmade dragonflies

The method of making handmade dragonflies is very simple. It only takes an origami and a straw to make one in a few minutes.

Can fly high, it's fun.

Next is the detailed production tutorial of bamboo dragonfly.

First cut a 3* 10 cm origami, and trim two right angles at one end into an arc.

A * * * needs 4 pieces, which can be the same color or different colors. Stick two pieces of paper together with double-sided tape.

Then, prepare a straw of 1.5 cm, cut one end of it open 1.5 cm, and clip two pieces of folded paper.

Secure origami and straw with mini stapler.

Two origami sheets are folded 30 degrees in opposite directions.

A fun bamboo dragonfly is ready. Be sure to take it outdoors, because it flies too high.

Bamboo dragonfly consists of two parts. One is a bamboo handle. Cut a bamboo pole (handle) with a length of 20 cm and a diameter of 4 to 5 mm from a bamboo. The second is "wings". Use a piece of bamboo with a length of 18 to 20 cm, a width of 2 cm and a thickness of 0.3 cm, punch a small round hole with a diameter of 4 to 5 mm in the middle, and install the bamboo handle.

Then symmetrically cut an inclined plane on both sides of the small hole to play the role of bamboo dragonfly rising with the air vortex. When the wings are finished, insert the bamboo handle into its small hole. When playing, hold the bamboo handle with your hand and rub it quickly. When your hand is loose, the bamboo dragonfly will fly to the sky.