What is the reason for Honda Binzhi's start-stop function failure?

The reasons for the failure of Honda Binzhi's start-stop function are: the throttle is too dirty and the engine pad is aging. If the throttle valve is too dirty and there is too much carbon deposit in the nozzle, after a certain mileage, the throttle valve will not close tightly or the idle speed of the stepping motor will be stuck, which will lead to the high idle speed of the engine, and the carbon deposit generated during the engine operation will also lead to vehicle jitter, especially when starting the vehicle, the engine jitter will be more serious than usual, and it may even be impossible to start at one time. Therefore, when the vehicle shakes, check the throttle and fuel injector first. If the throttle valve is found to be too dirty or the fuel injector has too much carbon deposit, it should be cleaned in time. Car jitter is sometimes related to the aging of engine pads. The engine foot is actually the damping system of the engine. The engine feet are responsible for absorbing the slight vibration of the engine during operation. If there is something wrong with the engine foot, these vibrations will be transmitted to the steering wheel and cab, resulting in idling jitter. When the automobile engine is idling and the automobile electrical system is turned on, it is most likely to cause vehicle jitter.