How to install the shutter door?

The shutter door is a series of multi-joint movable door pieces, and the upper and lower doors rotate around the scroll above the door in the fixed slide way.

Rolling doors are suitable for commercial facades, garages, shopping malls, hospitals, factories and mines and other public places or houses. Especially in the place where the door opening is large and it is not convenient to install the ground door body, it plays a convenient and quick opening role. Such as garage doors, shopping mall fire shutter doors, airplane garage doors, etc.

Here are some practical tips:

Tools/raw materials

Impact electric drill, hand electric drill, electric welding machine, cutting machine, special fixture, scraper, chalk wire package, screwdriver, hammer, wire pendant, spirit level, etc.

The required materials are: blade, guide rail, central column, upper cover and reel.

Steps/methods

1. First, locate and draw lines, and determine the horizontal and vertical lines.

2. Install the border;

3. Door rolling machine, the installation of door rolling machine must be installed according to the requirements in the manual;

4. Install the reel;

5. Assemble the door body

6. Fix the door body

7. Install the plug

8. Test run

9. Install the slideway

10. Install the manual device

1 1. Install the box.

12. Commissioning and running

13. accepted

Matters needing attention

The surface of aluminum alloy parts is oxidized, and the surface of copper parts is galvanized, painted or sprayed with plastic.

The riveting and welding of this method should be firm and reliable, and there should be no looseness, cracks, unmelted, pores and inclusions.

Blade engagement should be flexible.

Confirm the size of the doorway. When the hole in the wall is a mixed territory, embedded parts should be embedded in the hole, and then the navigation and bearing support should be welded.

Confirm the installation of horizontal and vertical lines, and install them in turn according to the set size;

The door rolling machine must be installed according to the requirements of the instruction tree;

The reel and bracket must be firmly installed on the mixed territory mechanism or embedded parts;

The blade of the door body is inserted into the slideway not less than 30mm, and the deviation of the width of the door body is within 3 mm;

The door frame is not vertical, and the leaves of the door body are not flat on the line;

Excessive noise during operation;

Friction between roller and blade;

The friction or gap between the blade and the rail is too large;