What is the matching method of emgrand gl throttle?

Disconnect the negative battery for a few minutes, and the vehicle will go to sleep. In this process, the original memory of the on-board computer will be restored to the factory settings, and then the power cord of the negative battery will be connected, and the ignition test run will be normal.

Throttle is a controllable valve that controls air to enter the engine. After the air enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, and the combustion is successful. It connects the air filter and the engine block, and is called the throat of the automobile engine.

There are two kinds of throttles: traditional cable throttle and electronic throttle. The traditional engine throttle control mechanism works by pulling a cable (soft steel wire) or a pull rod. One end of the cable is connected with the accelerator pedal, and the other end is connected with the accelerator linkage plate. The electronic throttle mainly uses the throttle position sensor to control the throttle opening according to the energy required by the engine, so as to adjust the intake air. When cleaning the throttle valve, it is not necessary to disassemble it, but the sealed part of the air inlet must be cleaned.

Idle motors must be disassembled before cleaning, and nozzle borrowing and cleaning have their own advantages and disadvantages. Generally speaking, the maintenance station suggests to avoid disassembly to prevent unnecessary waste, such as the need to replace the sealing ring or install some gaskets after disassembly, or the oil leakage during disassembly and assembly will delay the owner's time. (Photo/Text/Photo: Chen Jie 2) @20 19