Geely Job air conditioner filter location, how to remove Job air conditioner filter?

The air conditioning filter is in the co-pilot position, under the glove box, near the center console. Enter the car, clean up the sundries in the glove box, and then disassemble it. Air-conditioning cleaning needs to prepare needle-nosed pliers, a Phillips screwdriver and a new air-conditioning filter element. The replacement method is as follows.

1. Open the glove box and remove the rotating shaft with needle-nose pliers. There is a rotating shaft bearing on the left and right sides of the glove box. Pay attention. Don't deform the parts. After the shaft is removed, the glove box can be removed.

2. Remove the screws here with a Phillips screwdriver, and carefully press the motherboard with your hands. After opening the cover, push the backboard from the right to the left, and be careful of the wires next to it. After the backboard was removed, the original air conditioning filter element was exposed.

3. After the dirty filter element is taken out, wipe off the dust in the filter element groove with a wet cloth, open the newly bought clean filter element, insert it, and restore it to its original position in the reverse direction of the disassembly sequence (pay attention to the installation direction of the air conditioning filter element).