Where is the Buick Hideo accelerator?

Under the steering wheel. The position of Buick Hideo universal joint under the steering wheel. Damage to steering universal joint will lead to oil leakage of steering gear. The connection between the upper cover and the small shaft 10 byte leaks oil, and the dust covers at both ends of the steering gear leak oil. The replacement steps of steering universal joint are as follows:

1. Lift the front end of the vehicle with a jack. Place the jack at the front of the rack to ensure stability. Drain transmission oil to prevent leakage. Fill the transmission plug;

2. Prepare a liquid container and disconnect the oil drain plug of the transmission. Ensure the integrity of the drive shaft assembly by creating reference marks. Remove the assembly clamp or bolt to drive the drive shaft;

3. Remove the transmission shaft from the transmission by removing the fork. Fix the bearing cover of the anti-collision needle roller bearing with adhesive tape. Stabilized on the auxiliary drive shaft. Delete the tape. Pass the bearing through the yoke and remove the retaining ring;

4. Use the sleeves and levers with different sizes provided by the vice to keep the bearing cover away from the yoke. Push the cover onto the assembly with pliers. Pass the transmission shaft around the vice and repeat the above process at the other end;

5. Separate the two universal joint forks from the transmission shaft. Remove all dust and debris from the entire drive shaft assembly to ensure that it is completely clean. Apply a small amount of grease to the replaced cover. Partially insert the bearing cover into the yoke and replace the bearing cover;

6. Install the universal joint on the cover. Partially insert the opposite cover. Align the universal joint and push the cover to the correct position with a press. Insert the retaining ring. Position of the drive shaft. Make sure that the fork is correctly aligned with the drive shaft.

Under the steering wheel.

Million car purchase subsidy