How to match the qx50 throttle in England and finidi?

1. Open the driver's door. 2. Press the brake pedal to start the engine. 3. Press a key to start. 4. All instrument lights are on, which proves that the engine is started. 5. Press the valve matching button next to the gear lever.

There are generally three methods for throttle matching: manual matching, power-off matching and diagnostic instrument matching. Manual matching is usually suitable for cable throttle of low-end cars, and diagnostic instrument matching is usually used for electronic throttle. When the idle speed of the vehicle is unstable, it is difficult to start, and the power drops, it means that the automobile throttle may need to be cleaned.

Throttle cleaning is generally every 20,000 km to 40,000 km. However, it should be noted that it is not good to check and clean the throttle. Excessive cleaning will lead to premature scrapping of the throttle. Frequent cleaning will cause the special coating of the throttle cavity to be washed away gradually, and the cavity will lose its coating, which will more easily lead to greasy adhesion, thus forming a vicious circle, and the final result will be scrapping.

(Photo/Text/Photo: Li Shuiqing) @20 19