Civic throttle matching

Civic throttle matching method is as follows:

1. Turn on the ignition switch and use the Honda special detector HDS to enter the driving computer;

2. Select the "Inspection" function;

3. Select the' ETCS' item, test the throttle position sensor according to the prompts in the first step, and then perform the matching function of the throttle position sensor in the second step;

4. Turn off the ignition switch after performing the above functions;

5. Start the engine at normal idle speed;

Throttle: Throttle is a controllable valve to control the air entering the engine. After the air enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, which will be burned to do work. It is connected with the air filter at the top and the engine block at the bottom, and is called the throat of the automobile engine.

Throttle classification: There are two kinds of throttles: traditional cable throttle and electronic throttle. The traditional engine throttle control mechanism works through a cable (soft steel wire) or pull rod, one end of which is connected with the throttle pedal and the other end is connected with the throttle linkage plate. The electronic throttle mainly uses the throttle position sensor to control the throttle opening according to the energy required by the engine, so as to adjust the intake air. Million car purchase subsidy