Is it suitable for tiling in winter?

In winter, the temperature is relatively low. If you stick ceramic tiles, the cement at the bottom will freeze easily, and the best effect will not be achieved. After the tiles are laid, they may come out.

Now the phenomenon of empty drum and falling off.

1, the indoor decoration construction temperature should not be lower than 4 degrees, otherwise it will affect the tiling (which will reduce the adhesion between cement mortar and brick).

2. The sand should be carefully screened and there should be no ice. When the temperature is different, some antifreeze can be added appropriately. When mixing mortar, the temperature of water

The temperature should not exceed 80℃.

3. Soak the tiles with water before laying them in winter, and the water must be saturated. Only in this way will it not be stuck.

Due to pulp suction, it is not firmly bonded to cement, and it is empty drum and falls off.

4. Tiles need to be moved from outdoor to indoor for 24 hours, and can only be laid after adapting to indoor temperature.

5, brick should be timely tick off seam after the shop is stuck. As long as you pay attention to these points, there will be no problem in decorating and sticking bricks in winter.