How to disassemble Gree air conditioner?

1, take fluorine from the external machine first, and then cut off the power supply.

2. Then loosen the copper nut with a wrench, and you can move the cabinet part freely.

3. If you want to continue disassembly, please use a Phillips screwdriver to start with the screws on the back of the cabinet. The main components of the cabinet are just a few: shell, fan unit, exchanger, sink and motherboard.

Step 1: Remove the outdoor unit:

Turn on the machine, use a wrench to open the copper caps of the air pipe and liquid pipe of the outdoor unit, and use a 5 mm hexagonal plate to close the thin pipe, namely the liquid pipe, and the thick pipe, namely the air pipe, once every minute.

Then cut off the power supply, loosen the thick pipe and thin pipe with a wrench, hit the electrical wiring cover with a cross screwdriver, loosen the power cord and cover it. Then remove the outdoor unit.

Step 2, disassemble the indoor unit:

Hold the lower corner of the indoor unit with both hands, lift it up and take off the indoor unit. (If the elevator doesn't move, find a hook, hook it along the lower edge of the indoor unit, gently pull it out to disengage the hook, then lift it up and take off the indoor unit. ).

Pull the air conditioning connecting pipe out of the hole and coil it into a ring with a diameter of one meter. Be careful not to bend the copper tube into a dead bend. Just remove the hanging plate of the internal machine.