Audi air conditioning data stream channel number

Audi air conditioning data stream channel number is as follows:

1. engine: channel 00 1 electronic throttle (throttle body adaptation), indicating throttle adaptation, wait until "matching adaptation, normal adjustment" is displayed, channel 002 mass air flow sensor detects, engine runs G28 (idling), and warms up.

2. Matching adaptation: channel 00 1 resets the self-learning value, and the adaptive channel that stores the reset adaptive value; Channel 00 1 adjusts its idle speed and saves the replacement adaptive value in this channel, while channel 002 limits the torque and saves the replacement adaptive value in this channel.

3. Anti-lock braking: Channel 00 1 Brake pump exhaust, basic settings, status and "activation" description. Align the steering angle sensor (G85) of channel 00 1, code it with "40 168" main volume u002F-II, and then "activate" the basic settings.

The following is the data cycle signal of Audi air conditioner. There are several ways to check it:

1.0 1 group: general engine data, engine speed (720~82 rpm), coolant temperature (80~ 105), oxygen sensor1(-10 ~/kloc-)

2. Description of display area 2: Fault memory stores faults related to coolant temperature sensor -G62, and then the engine control unit will start the engine using intake air temperature as a substitute value (starting temperature substitute value).

3. Description of display areas 3 and 4: The display value should change around 0. If the fixed value is always displayed as 0, it means that the regulation A is switched from the regulation state to the control state, that is, there is a fault in the regulation. At this point, you should check the fault memory to see if there is a fault code. Million car purchase subsidy