How to install the throttle line of micro-tiller

Method of installing throttle line: 1. The traditional cable accelerator is a steel wire with one end connected to the accelerator pedal and the other end connected to the accelerator, and its transmission ratio is 1: 1, which means that the opening angle of the accelerator is the same as how much we step on it with our feet, but in many cases, the throttle should not be opened at such a large angle, so the opening angle of the throttle is not necessarily the most scientific at this time. 2. The electronic throttle controls the opening of the throttle through cable or wire harness. On the surface, the traditional throttle cable is replaced by cable, but in essence it is not only a simple change of connection mode, but an automatic control function for the power output of the whole vehicle. 3. If you replace the accelerator cable, you should replace it in a 4S shop or a professional repair shop, because it will affect the idle speed of the vehicle engine. If the adjustment is not good, it will lead to engine idling instability and flameout.