Top fixed cylinder model

It is SMC cylinder cdq2b25-5-a93l, with a diameter of 25mm and a stroke of 5mm, and a built-in magnetic ring. A93l is a 3-meter-long magnetic switch wire. Mxs-as 16-x 12 is a pneumatic slide, but the model is wrong. So is the front-end regulator.

Axial bearing (ms 1 type), front flange (mf 1 type), rear flange (mf2 type), etc. When the piston is required to reciprocate linearly and the cylinder body is required to swing in a larger arc, the installation methods such as tail trunnion (mp4 or mp2 type) and intermediate shaft pin (mt4 type) can be selected. If it is necessary to output linear reciprocating motion in rotation, a rotary cylinder can be used. When there are special requirements, special cylinders can be selected.

Security risks:

For each manufacturer, the cylinder model is different, because each manufacturer's model cannot be exactly the same. So if you want to know more, you can refer to the selection manual provided by the manufacturer, so it is not easy to make mistakes.

CA and CM in the cylinder model are both cylinder attachment models, in which CA refers to the tail single ear and CM refers to the middle swing belt base, which are different. There is a difference whether there is an S behind the cylindrical model. An S indicates that the cylinder has a magnetic ring, otherwise there is no magnetic ring.