How to use wall-hung boiler to save water and gas

Small coup to save water: 1. When hot water is used, small water flow should be turned on first, and then the water flow should be adjusted as needed after the boiler is started and the ignition is delayed, so that a lot of water can be saved and the temperature rise time of water is short. Especially for large units with bathrooms far away from boilers. 2. Because every time the hot water tap is turned on, the boiler will start once, with a delay of about 6 seconds, during which a lot of cold water will be wasted.

Small coup of solar terms: Many office workers are used to turning off the boiler when there is no one at home, and then putting the boiler in a high-end place for rapid heating after work. This is very unscientific. Because this means that starting from scratch, due to the large temperature difference between the room temperature and the boiler set temperature, the boiler needs time to ignite, which not only saves energy, but also wastes gas, increases the time for residents to catch cold, and there is a danger that the boiler or radiator will be frozen. The best way is to turn it down for a short time in the absence of people, and don't turn it off.