Hyundai Elantra DIY cleans the throttle and idle motor, and installs daytime running lights.

Elantra (check the transaction price | detailed description of the model) is a car launched by Beijing Hyundai in 2008, which combines the characteristics of romance in the legal system and fuel economy in Japan. ? Yuedong? Smooth line design, spacious driving space, economic and environmental protection power system and meticulous body safety fully cater to the needs of consumers and sound the horn of comprehensive upgrade for the whole market segment.

Throttle is a controllable valve that controls air to enter the engine. After the air enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, and the combustion is successful. It connects the air filter and the engine block, and is called the throat of the automobile engine. How often the throttle is cleaned depends on the use environment of the owner. If the vehicle is in a place with serious environmental pollution, it needs to be cleaned regularly.

Clean the throttle and idle motor:

First, apply a little oil on the fixed metal beam ring to avoid slipping teeth during disassembly. Remove the metal ring of the throttle hose. After the hose is removed, the left end is the position of the throttle. Remove the negative electrode of the battery, turn off the ignition switch, straighten the throttle, and spray a small amount into the throttle. Carburetor cleaner? Then use polyester rags or high spinning? Nonwoven fabric? Scrub carefully. Deep in the throttle, where you can't reach it, you can scrub it carefully with a rag.

When cleaning the throttle valve, it is not necessary to disassemble it, but the sealing part of the inlet steam must be cleaned, and the idle motor must be disassembled for cleaning. There are advantages and disadvantages of cleaning nozzles by borrowing and disassembling. Generally speaking, the maintenance station suggests disassembly and washing to prevent other unnecessary waste, such as replacing the sealing ring or installing other gaskets after disassembly, or delaying the owner's time because of oil leakage and air leakage during disassembly.

Install daytime running lights:

There are three lines on the left and right of the line connecting the daytime running lights, two of which are connected to the plug and the other is connected to the left and right turn signal lines respectively. Wiring depends on you, but if there is a grinding position, protect the wire and be careful not to wear out the leakage. @20 19