Cruze accelerator cleaning tutorial

The way Chevrolet Cruze cleans the throttle is to remove it or clean it without removing it. Disassembly and cleaning is easy to understand, that is, the throttle assembly is removed, and the technicians use special cleaning agent to clean the pollutants inside the throttle, and then install and repair it. Cleaning method of Chevrolet Cruze accelerator: 1. After removing the air pipe on the throttle, ...

How often does Cruze clean the throttle?

Chevrolet Cruze cleans the throttle around 200 yuan. Throttle is a controllable valve, which controls air to enter the engine. After the gas enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, which will be burned to do work. It connects the air filter and the engine block, and is called the throat of the automobile engine. How often the throttle is cleaned depends on the use environment of the owner. If the vehicle is in a place with serious environmental pollution, it needs to be cleaned regularly.

Precautions for cleaning the throttle of Chevrolet Cruze:

If there is too much sludge in the throttle, it may cause poor engine acceleration and increase fuel consumption, which is a big worry for the owner. What if the throttle is dirty? Wipe it clean. Go to the 4S shop, and it will be finished soon, but don't you go to the 4S shop every time? Actually, you don't have to. You can do it yourself. Just don't forget to initialize.

First, apply a little oil on the fixed metal circlip to prevent the teeth from slipping during disassembly. Remove the metal wire harness ring of the throttle hose. After the hose is removed, the left end is the position of the throttle. Remove the negative battery, turn off the ignition switch, straighten the throttle, spray a small amount of "carburetor cleaner" into the throttle, and then carefully scrub it with a polyester rag or a high-count "non-woven fabric". Deep in the throttle, where the hand can't reach, you can clamp it with a rag and scrub it carefully.

When cleaning the throttle valve, it is not necessary to disassemble it, but it is necessary to clean the sealing part of the inlet steam. Idling motor must be removed before cleaning. Cleaning the nozzle and avoiding disassembly have their own advantages and disadvantages. Generally speaking, the maintenance station suggests avoiding disassembly and cleaning to prevent other unnecessary waste, such as replacing the sealing ring or installing other gaskets after disassembly, or leaking oil and gas during disassembly and assembly, which will delay the owner's time.

Cruze accelerator cleaning tutorial

The way Chevrolet Cruze cleans the throttle is to remove it or clean it without removing it. Disassembly and cleaning is easy to understand, that is, the throttle assembly is removed, and the technicians use special cleaning agent to clean the pollutants inside the throttle, and then install and repair it.

Cleaning method of Chevrolet Cruze throttle;

1. After removing the gas pipe on the throttle, we can remove the whole throttle. Generally, the throttle is fixed on the engine block with four bolts, and we can quickly remove it with suitable tools.

2. The side of the throttle near the combustion chamber is generally dirty with traces of black carbon deposition, which is the main part that needs cleaning. Cleaning the throttle is mainly to remove carbon deposits on it. We can use special throttling cleaning liquid or detergent. It should be noted here that the cleaning principle of this cleaning agent is to dissolve carbon deposits, and its composition is harmful to human body, so it is best to wear gloves and masks when cleaning.

3. Spray the cleaner to the position with more carbon deposits on the throttle, and wait for about 5- 10 minutes to dissolve the carbon deposits. Using brushes can speed up the removal of carbon deposits.

When we see that the stain on the accelerator has completely dissolved, we can wipe the detergent inside the accelerator with a clean towel. Clean the rear of the throttle valve so that it is free of carbon deposits.

5. Install the cleaned throttle on the engine block according to the original position of the throttle. Then install all air pipes to complete the whole process of cleaning the throttle. After all the hardware is installed, we need to initialize the throttle valve. How often does Cruze clean the throttle? Cruze accelerator cleaning tutorial @20 19