How to open and close the pneumatic valve

In general, the opening and closing of pneumatic valves need to be realized by pneumatic actuators, and the specific steps are as follows:

Open the air source: Before opening or closing the pneumatic valve, the air source must be opened so that the pneumatic actuator can work normally.

Control the pressure of the air source: after the air source is turned on, it is necessary to control the pressure of the air source to ensure that the pneumatic actuator can work normally.

Control the pneumatic actuator: under the condition of normal air source and air source pressure, the pneumatic valve can be opened and closed by controlling the pneumatic actuator. Generally speaking, it can be realized by controlling the solenoid valve or manual valve of pneumatic actuator.

Check the valve status: After opening and closing the pneumatic valve, the valve status must be checked to ensure that the valve has been completely opened or closed.

It should be noted that opening and closing pneumatic valves requires certain skills and experience to ensure the safety and accuracy of operation. Before operation, you must understand the structure and working principle of pneumatic valve and operate in strict accordance with the operating procedures. If you are not familiar with the operation, it is recommended to seek professional treatment.