Does the Roewe rx5 throttle need to be matched?

Roewe rx5 throttle needs to match. The Roewe rx5 has a length, width and height of 4556 mm, 1855 mm, 17 19 mm and a wheelbase of 2700 mm rx5 is a compact suv.

Roewe i5 throttle matching method is as follows:

1, match manually. Some cars use a cable throttle. It can be matched manually after changing the throttle. When the key of the ignition switch is turned on and off for many times, the on-board computer will delete the memory of the crude oil door, store the data of the new throttle, and strike the vehicle. When the vehicle runs normally, the matching is completed.

2. Power failure matching. After replacing the throttle, disconnect the negative electrode of the battery and wait for one minute before installation. In this process, the original memory of the on-board computer will be erased, the factory settings will be restored, and the vehicle will start to run normally and the matching will be successful. This method is only suitable for low-block cars, but not for high-block cars.

Diagnostic instrument matching. After changing the throttle, you can match it with a special diagnostic instrument for automobiles. After entering the system, select the action test and click the adaptive value reset to zero. This is done several times in a row, and the vehicle starts to run normally, indicating that the matching is successful.

4. Match with the old throttle position sensor. When replacing a new throttle, the idle speed is unstable and too high. You can unplug the newly installed throttle position sensor and plug it into the old throttle position sensor. At this time, when the vehicle collides, you can turn off the engine and plug the wire harness back into the new throttle.

(Photo/Text/Photo: Ask the Beast in the Q&A) Weilai ES8 Weilai ES6 Ask the World M5 Weilai EC6 Xpeng Automobile P7 Chuanqi GS8 @20 19.